zero insertion force testing socket

Brand Name:DAXIAN

Model Number:DX8326

Place of Origin:China

...Testing Equipment for IEC884-1 Standard Standard: Designed in accordance with the relevant standards of GB2099.1, IEC884-1 and other electrical accessories, it is mainly used to detect the maximum force required when the plug is withdrawn from the socket and the required force for pulling out the single-pole plug from the socket assembly. The main test is the two-pole 10A, three-pole 10A and 16A test plugs and 10A, 16A test

Brand Name:HongCe

Model Number:HC9908

Place of Origin:China

...Socket Tester Torque Test Device Standard with Plug Socket Tester: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 14.23.2 Standard description with Plug Socket Tester: The plug socket tester torque test device is inserted into a fixed socket-outlet complying with this standard, the socket...

Place of Origin:China

Brand Name:HongCe

Model Number:SOB-1

IEC60065 Figure 11 Socket-outlet Torque Balance Product information: The HT plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug ...

Brand Name:I-SUNTOP

Model Number:iso-7894

Place of Origin:china

... Life Testing Machine Electrical Switch, Plug and Socket Service Life Tester for Mobile phone/computer/USB plug machine is suitable for many kinds of connector plug and pull test, adopt embedded microcomputer measure and control technology. It can show the

Brand Name:iqualitrol

Model Number:AST-J

... doing the push pull force insertion force and destructive experiment. Features: 1:Hand press, operate simply and firmly. 2:Compact structure, gear and rack transmission. 3:Fix firmly, ...

Brand Name:Innovation

Model Number:INFS-013

Place of Origin:China

...Force Sensor 5-100KG Tension S Type mini Load Cell/Force Sensor 5-10V for automatic equipments INFS-013 5-100KG Stainless Steel Tension S type Load Cell/Force Sensor Detailed Product Description: Mainly applied in tension and compression testing instruments , automatic equipments and testing fields,such as insertion force test...

Brand Name:HongCe

Model Number:HC9902

Place of Origin:China

... of the pressure plate, of the base and of the specimens being (23 ± 2) °C and the force applied being 300 N. The specimens are first placed in position a), as shown in figure 8, and the force is applied for 1 min. They are then placed in position b),

Brand Name:PEGO

Model Number:JIS8303

Place of Origin:China

...Socket Tester Japanese Stainless Steel Plug Socket Gauge No. Figure number Gauge description 1 JIS C8303 Figure A.1 JIS C8282-1:2010 CL22.1 Maximum retaining force gauge (15A125V two-pole) 2 JIS C8303 Figure A.1 JIS C8282-1:2010 CL22.2 Minimum retaining force gauge (15A125Vtwo-pole) 3 JIS C8303 Figure A.1 JIS C8282-1:2010 CL19 Test plug for temperature rise test...

Brand Name:HeJin

Model Number:HC9933

Place of Origin:China

Plug Socket Test Equipment Ball Pressure Test Apparatus Made Of Stainless Steel Standard: IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 25.2, 25.3 and figure 37 Application: This ...

Brand Name:Sinuo

Model Number:SNQC1013C

Place of Origin:China

.... Application: The structure of the charging interface should make it easy to insert and remove the charging gun, and should prevent the charging gun from falling out of the socket during normal use. Check whether the maximum force required to pull the

Place of Origin:China

Brand Name:KeRang

Socket-outlet Torque Balance SOB-1 Product information: The HT plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally ...

Brand Name:HeJin

Model Number:HC9902

Place of Origin:China

....1, 24.5 and figure 8 Each specimen of plug or portable socket-outlet is then pressed between two flat surfaces with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after removal from the test apparatus, and shall not show

Brand Name:Purple Horn

Model Number:UKS-F156-6

Place of Origin:China

Product testing : Our products have undergone the tests under the extreme conditions such as the pesky cold and hot , dustproof, immersed in water abd so on , and they have got the certifications from relevant authorized organizations according to the ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I20, HT-I21

... to test whether the live parts inside can be touched. The HT-I21 test probe with 1N force is for testing whether the live parts with the protection of socket can be touched. Technical parameters: Application method: Touching the specimen with the end of

Brand Name:iqualitrol

Model Number:HF-1000K

... in electron, high & low voltage electrical appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile, and so on industries for testing of pull or push load test, insertion force or

Brand Name:kingpo

Model Number:IEC 60884-1-figure 13

Place of Origin:china

...testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V when a inserted appliance applying a lateral strain to it. Test sample: Socket-outlets Feature: Made according to standard dimension requirements, use to check the mechanical strength of socket...

Brand Name:YUYANG

Model Number:YY1116

Place of Origin:China

...Force Gauge High Accuracy Pointer Instructions Description: FB/PS force gauges will withstand industrial environments and yet retain calibration for extended periods. Ergonomic design makes it ideal for hand held use, or it can be mounted to a test stand. The Zero-Tare ring allows you to zero...

Brand Name:kingpo

Model Number:ISO5356-1

Place of Origin:china

...Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test gauge according to Figure A.1 and Table A.1, by applying an axial force of (35 ± 3,5) N for 8,5 mm, 11,5 mm, and 15 mm cones or sockets and (50 ± 5) N for 22 mm and 30 mm cones or sockets while simultaneously rotating the cone or socket...

Model Number:2256-9357-0A-2401

...Test & Burn-In Sockets Product Overview 3M Textool BGA Test & Burn-In Sockets, with a 1.00 mm pitch, are designed for reliable testing and burn-in applications of Ball Grid Array (BGA) devices. These open-top sockets feature a double-beam, normally-closed contact design that provides balanced, opposing forces...

Brand Name:HongCe

Model Number:HC9906

Place of Origin:China

...testing equipment of Lateral Strain for socket-outlets with 5N weight​ Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the socket-outlets ratings up to 16A and 250V when a inserted appliance applying a lateral strain to it. Test sample: Socket-outlets Feature: Made according to standard dimension requirements, use to check the mechanical strength of socket...