zero insertion force testing socket

Place of Origin:Guangdong, China

Brand Name:CNJWY

Model Number:CNJWY-FH254-MR40

...carrying a six finger contact cage that wraps a round or square post on all sides. The result is a socket whose insertion force stays flat over hundreds of cycles, which is why machined sockets dominate burn-in boards, IC test sockets and any assembly that

Brand Name:HUAKAI

Place of Origin:Guangdong, China

... repeated insertion and extraction tests to evaluate the mechanical performance and lifespan of products. With high precision control of force, speed, and displacement, this equipment is widely used in quality control laboratories, R&D departments, and

Place of Origin:China

Brand Name:Innovation

Model Number:IN-MT-013C

Screw Tension and Compression Force Sencor Load Cell IN-MT-013C Mainly applied in tension and compression testing instruments , automatic equipments and testing fields,such as insertion force test instruments,riveting machine,welding machine, hot & cold ...

Place of Origin:China

Brand Name:Innovation

Model Number:IN-MT-020

Screw Tension and Compression Force Sencor Load Cell IN-MT-020 Mainly applied in tension and compression testing instruments , automatic equipments and testing fields, such as insertion force test instruments,riveting machine,welding machine,hot & cold ...

Brand Name:kingpo

Model Number:KP-OT62

Place of Origin:china

... which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.

Brand Name:Sinuo

Model Number:SN1013B

Place of Origin:China

...Force and Latching Verification Test Equipment Product Information: It is designed and manufactured according to the standard requirements of IEC 62196-1:2020 clause 16.16, and etc. The fixed accessory (the socket-outlet or vehicle inlet) is mounted such that the mating accessory moves vertically downward into it during the first stage of insertion...

Brand Name:Pego Electronics

Model Number:PG-ASNZSFD1

Place of Origin:China

... is designed according to AS/NZS3112 annex D and clauses 3.6.3 and 3.8.2, for checking the socket-outlets in abnormal insertion. 2. Specification Material Hardened steel Quantity 3 (10A, 15A, 20A) Dimension As per AS/NZS 3112 appendix D AS/NZS3112 annex D

Brand Name:HongCe

Model Number:LS-1

Place of Origin:China

...Test Apparatus IEC Test Equipment For Lateral Stress Product details: The appliance conforms to the standard of IEC60884-1 clause 13.14 figure 13. It is suitable for checking socket which rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see whether there will be any damage to the socket in the standard sense when the electrical appliances insert to the socket...

Brand Name:PEGO GROUP

Model Number:PG-CRT

Place of Origin:China

...Force Test Apparatus 220V/50Hz 1. Introduction This device is manufactured according to the IEC60884-1 clause 23.2 figure 20. It is used to check the effectiveness of the retention of the cable by the cord anchorage. It’s applied to the removable plug, removable mobile socket, non-rewirable plug, rewirable mobile socket. The according tensile force...

Brand Name:iqualitrol

Model Number:AST

... force gauge to make up of different test equipment doing the push pull force insertion force and destructive experiment. Features: 1, Hand press, operate simply and firmly. 2, Compact structure, gear and rack transmission. 3, Fix firmly, ...

Brand Name:XTK

Model Number:Phone Jack

Place of Origin:Guangdong,China

...Socket Stereo Audio Jack For PCB Mount 4 Pole 2.5mm Headphone Socket 7 Pin Phone Jack Product Description product name headphone socket Product number PJ-24 Jack 2.5mm Current rating DC 30V 0.5A DIELECTRIC STRENGTH AC 500V ims(50~60Hz)FOR 1 MIN Contact resistance 50mΩ MAX. Insulation resistance ≥100mΩ Withstand voltage 500V AC for 1Min Life test 5000 (times) Insertion force...

Brand Name:Sinuo

Model Number:SNQC1013

Place of Origin:China

... Overview It is used to check the withdrawal force required when the test plug is withdrawn from the socket-outlet and latching device. Technical Parameters A Withdrawal force The switched EV socket-outlet or switched vehicle connector with interlock is

Brand Name:Gaoxin

Model Number:GX-5623

Place of Origin:China

... Name:Fully automatic plug and pull force tester 2. Product Model:GX-5623 3. Description: 1. Graphics can be printed and stored (displacement curve, life curve, test report). 2. Test data can be stored on hard disk (each piece of data can be stored for

Place of Origin:China

Brand Name:HongCe

Model Number:LS-1

...rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see whether there will be any damage to the socket in the standard sense when the electrical appliances insert to the socket and give it transverse stress.

Place of Origin:China

Brand Name:HongCe

Model Number:LS-1

...rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see whether there will be any damage to the socket in the standard sense when the electrical appliances insert to the socket and give it transverse stress.

Brand Name:HeJin

Model Number:HC9916

Place of Origin:China

...Socket Test Apparatus For Verification Of Maximum And Minimum Withdrawal Force Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 22.1, clause 22.2, figure 18&19 and table 16. Application: This device is used for verify whether the maximum withdraw force and minimum withdraw force to pullout a plug or plug pin from socket...

Brand Name:HongCe

Model Number:HC9908

Place of Origin:China

...purposes – Part 1: General requirements' clause 14.23.2 Standard description with Plug Socket Tester: The torque test device of the plug and socket tester is inserted into a fixed socket complying with this standard, and the socket is rotated about a

Brand Name:SHC

Model Number:SC-Fig910

Place of Origin:China

...round R0.2±0.05 Force With 20N force Standard IEC60884-1 figure 9 Model/ Parameter SC-Fig10 Item Name Test Probe with Force The probe part Φ1+0.015 0 ×80±0.5 The diameter of the round R0.05 Force With 1N force Standard IEC60884-1 figure 10 Standards:

Brand Name:SHC

Model Number:SC-Fig910

Place of Origin:China

...round R0.2±0.05 Force With 20N force Standard IEC60884-1 figure 9 Model/ Parameter SC-Fig10 Item Name Test Probe with Force The probe part Φ1+0.015 0 ×80±0.5 The diameter of the round R0.05 Force With 1N force Standard IEC60884-1 figure 10 Standards:

Brand Name:SHC

Model Number:SC-JISc8303

Place of Origin:China

...Minimum retaining force gauge(15A125V) SC-JS803 Figure A.1 Test plug for temperature rise test(15A125V) SC-JS804 Figure A.2 Maximum retaining force gauge(15A125V) SC-JS805 Figure A.2 Minimum retaining force gauge(15A125V) SC-JS806 Figure A.2 Test plug for