zero insertion force testing socket

Brand Name:kingpo

Place of Origin:china

...axial strength of the cap does not decrease when the unmounted cap was assembled to the finished lamp, test results on the unmounted cap can be applied. NOTE The gauges are used to hold the lamp. Calibration is not required. Compliance: After this test the

Brand Name:kingpo

Place of Origin:china

40N ± 2N Switch Tester Coupling Implement Shell Pressure Test Device Product Information: This device is according to the IEC60320-1 standard requirement to design. Appliance inlets designed for surface mounting and having a shroud of metal, are compressed...

Model Number:SC301A

Place of Origin:Guangdong, China

Brand Name:SNC

...Force Gauge for prototype testing on exercise equip 2kg 5kg 10kg 20kg 30kg 50kg 100kg Product Description Parameter: Rated Capacity 2kg,5kg,10kg,20kg,30kg,50kg,100kg Accuracy 0.03%F.S Rated Output 2.0 ± 0.1mv/v Linearity Error ±0.03%R.O Hysteresis Error ±0.02%R.O Repeatability Error ±0.02%R.O Creep ±0.03%R.O/30min Temp. effect on zero ±0.05%R.O/10℃ Temp. effect on output ±0.05%R.O/10℃ Zero...

Brand Name:Phoenix Contact

Model Number:3070121

Place of Origin:CN

...Test disconnect terminal block Test disconnect terminal block, With test socket screws for insertion of test plugs, nom. voltage: 1000 V, nominal current: 41 A, connection method: Screw connection, 1 level, Rated cross section: 6 mm2, cross section: 0.2 mm2 - 10 mm2 , mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray Specifications Product type Test...

Model Number:1220S

Place of Origin:Guangdong, China

...Test Machine Pull Strength Tester Introduction: This machine is suitable for testing the insertion force and pullout force of various connectors and other products. It provides a variety of special clamps for connectors and an automatic centering device with patented design.And all the data can be stored test...

Model Number:1220S

Place of Origin:Guangdong, China

...Test Machine Pull Strength Tester Introduction: This machine is suitable for testing the insertion force and pullout force of various connectors and other products. It provides a variety of special clamps for connectors and an automatic centering device with patented design.And all the data can be stored test...

Brand Name:Purple Horn

Model Number:UKS series

Place of Origin:China

...Socket Industrial Receptacles After insertion and switching on, the plug is interlocked in the ON-position. After switching off and withdrawing, the switch is locked in the OFF-position. Description: > RAL 7035 grey, housing made of insulating material; > Flame and fire resistance, the base overcome the glow wire test...

Brand Name:Purple Horn

Model Number:UKS series

Place of Origin:China

... in the OFF-position. Description: > RAL 7035 grey, housing made of insulating material; > Flame and fire resistance, the base overcome the glow wire test at 850 centigrade; > Mechanical interlock enabling the switch to be operated only when it

Model Number:PJ-306-5P-CUM

..., and a contact resistance of 0.03. This socket has a durability of 5,000 insertion/withdrawal cycles and a withstand voltage of AC500V (50Hz)/min. The insertion and withdrawal force ranges from 3 to 20N. Manufactured by Zhejiang Chuangdu Electronics Co.,

Place of Origin:Jiangsu, China

Brand Name:grace

Model Number:DIN7984

... Socket Thin Head Cap Screws DIN7984 1. Material: Stainless Steel AISI304 AISI316, Carbon Steel, Brass and Copper 2. Surface: Galvanized, ...

Brand Name:Pego Electronics

Model Number:PG-AHR

Place of Origin:China

IEC 60884-1 Figure 40 Apparatus for Testing Resistance to Abnormal Heat of Insulating Sleeves of Plug Pins 1. Introduction Apparatus for testing resistance to abnormal heat of insulating sleeves is designed according to IEC6884-1 figure 40 and clause 28...

Brand Name:Pego Electronics

Model Number:PG-AHR

Place of Origin:China

IEC60884-1 figure 40 Apparatus for Testing Resistance to Abnormal Heat of Insulating Sleeves of Plug Pins 1. Introduction Apparatus for testing resistance to abnormal heat of insulating sleeves is designed according to IEC6884-1 figure 40 and clause 28...

Brand Name:PEGO

Model Number:PG-TP14

Place of Origin:China

...Test Finger Probe 14 Test Bar Conforms to IEC61032 with CNAS Certificate Introduction: It’s designed according to IEC61032 Figure 10. This bar is intended to verify the protection against access to hazardous live parts of socket outlets through shutters. Picture: Probe List: Probes and application Probe code Short description Force...

Brand Name:Pego Electronics

Model Number:PG-ASNZSF2.1

Place of Origin:China

Pin Bending Test Apparatus 1.Introduction The pin bending test apparatus is designed according to AS/NZS3112 figure 2.8 and clause 2.13.7.2. All flat pins of AS/NZS plugs rated up to and including 15A shall be subjected to a pin bending test. 2. ...

Brand Name:DAXIAN

Model Number:DX8310

Place of Origin:China

...Testing Machine for Wire and Cable Standards: DIN VDE0620, GB2099 test standards, with 5N weights The device complies with the technical requirements of the DIN VDE0620 and GB2099 test standards. It is suitable for checking whether any damage in the standard sense will be applied to a socket whose rated current is not more than 16A and whose voltage is not more than 250V when the electrical appliance that is inserted

Brand Name:Mitech

Model Number:WEW-S

Place of Origin:Beijing,China

Mitech MEW-S Digital Display Series Hydraulic Universal Testing Machine Overview/Applications Mitech MEW-S digital display series hydraulic universal testing machine, by controlling the high-pressure pump to drive the screw movement, equipped with the ...

Brand Name:Sinuo

Model Number:SN2113

Place of Origin:China

... shall withstand the lateral strain imposed by equipment likely to be introduced into them. Test sample: Socket-outlets having ratings up to and including 16 A and 250 V. Technical parameters: Test Plug Made according to specific country's plug and

Brand Name:RUIJIA

Model Number:RJDW-y200

Place of Origin:CHINA

...(30min) ±0.1%FS/30min Zero Balance ±1%F.S Safe Overload 300%FS Output 0.5-1.0mV/V Theory Test XYZ Three Axial Force Type China Description multi axial force sensor RUIJIA concentrated on sensor field more than 15 years with rich experience . During the

Brand Name:iqualitrol

Model Number:iRY-16

Test Stroke 350mm AC Motor Electric Tensile Testing Machine with Max Capacity 1000N Brief Introduction: Tensile testing machine is mainly used to test plastic sheet, pipe, paper, leather, plastic film and rubber, wire and cable, waterproof coil, wire and other materials, with different fixtures can be measured tensile compression, bending peel, displacement, tear , Insertion and extraction forces, tensile damage and other tests, tensile testing

Brand Name:TST

Model Number:HD-B609B

Place of Origin:China

Terms of treaments testing constriction strain Tensile Test Equipment HD-B609B-S Universal Test Machine.pdf Product Description: Tensile Test Equipment is applicable for tests of force load, Insertion and withdrawal, destruction in such industries as ...