test ignition

Brand Name:HeJin

Model Number:HAI-1

Place of Origin:China

...Ignition Tester Arc Ignition Speed ​​40 Times/Minute Flammability Testing Equipment Product Introduction HAI-1 High Current Arc Ignition Tester is a professional Flammability Testing Equipment created by the original manufacturer. It strictly follows international standards and provides enterprises with reliable material flame retardant performance testing support with efficient and accurate testing...

Brand Name:Sinuo

Model Number:SNM05

Place of Origin:China

... and restrictions: Medical device boards or devices in oxygen-rich environments 3. Application: It is used for spark ignition test of medical device boards or devices in oxygen-rich environment, and is used to evaluate the fire risk of its equipment under

Brand Name:AI

Model Number:AIC-61241

Place of Origin:CHINA

...Ignition Temperature Test Apparatus Introduction The Minimum Ignition Temperature Test Apparatus is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition...

Brand Name:AI

Model Number:AIC-61241

Place of Origin:CHINA

...Ignition Temperature Testing Equipment Introduction Minimum Ignition Temperature Testing Equipment is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition...

Brand Name:AI

Model Number:AIC-695220

Place of Origin:China

... wire ignition test chamber is designed according to IEC 60695-2-20 and GB 4943 standards and conforms to the standard hot wire ignition test method. This hot wire ignition test chamber is mainly used for testing the hot wire ignition hazard of electronic...

Brand Name:HongCe

Model Number:HWI-1

Place of Origin:China

...requirements of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors.

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

... Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating ...

Brand Name:HeJin

Model Number:HWI-1

Place of Origin:China

...Testing Equipment Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test...

Model Number:FGW

...ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite...

Brand Name:DAXIAN

Model Number:DX1012

Place of Origin:China

... ignition temperature and spontaneous ignition temperature of plastics using a hot-air furnace. Standards: - ISO 871 - ASTM D 1929 - GB/T 4610 - GB/T 9343 ...

Brand Name:AI

Model Number:DFI

Place of Origin:China Mainland

...Ignitability Tester is designed according to the BS476-12:1991. Method of test for ignitability of products by direct flame impingement.The accuracy of the Ignitability tester meets the requirements of relevant standards and meets the control requirements for the accuracy of measurement. Standards: BS 476-12:Fire tests on building materials and structures - Part 12: Method of test for ignitability...

Place of Origin:China

Brand Name:CHENGFENG

Model Number:CF8602

...test results: Flash-ignition temperature (FIT): The lowest temperature at which enough flammable gas is ignited when a flame is applied under specified test conditions. Self-ignition temperature (SIT): The lowest temperature at which it ignites by heating without any ignition source under specified test...

Brand Name:kingpo

Model Number:KP-FT3540

Place of Origin:China

Test method for hot surface ignition temperature for A2L, IEC 60335-2-40 Annex KK KK.1 General The hot surface ignition temperature of A2L refrigerants shall be determined according to Annex KK. The refrigerants shall be sprayed onto a horizontal flat plate surface which is set at the test temperature. The test system consists of a hot plate, a spray tube and a chimney. Figure KK.1 , Figure KK.2 and Figure KK.3 display the set-up of the test

Brand Name:KingPo

Place of Origin:China

IEC 60335-2-17 Spark Ignition Test Apparatus | Compliant with Standard Certification Product Overview: Professional Flame Retardancy Testing for Electric Blankets This spark ignition test apparatus strictly complies with IEC 60335-2-17 Clause 30.101 ...

Brand Name:Sinuo

Model Number:SN779

Place of Origin:China

...Ignition Test Apparatus For Arcing Resistance Test Product Information: The high current arc ignition test apparatus conforms to UL 746A clause 33, UL746C clause 49, UL 498 clause 114, IEC 60950-1, BS EN 60950-1, BS 7002, etc. This flammability test chamber is useful in differentiating among solid insulating materials with regard to resistance to ignition...

Brand Name:YUYANG

Model Number:YY418

Place of Origin:China

... has been designed, principally for testing building materials and composites, but it is capable of testing any sample of size 165mm × 165mm and up to a maximum of 70mm thick. The Apparatus measures the ignition characteristics of exposed surfaces of

Brand Name:Sinuo

Model Number:SN779

Place of Origin:China

..., UL746C clause 49, UL 498 clause 114, IEC 60950-1, BS EN 60950-1, BS 7002, etc. This flammability test chamber is useful in differentiating among solid insulating materials about resistance to ignition from arcing electrical sources. It is suitable for

Brand Name:HOOHA

Model Number:FTech-FTPC 8

Place of Origin:DONGGUAN

... is an analog cigarettes and matches as flame ignition source for resistance to ignition of upholstered furniture conduct test methods and evaluation This section applies to public places with mattresses, sofas and other upholstered furniture resistance to

Brand Name:KINGPO

...Test Equipment HWI Hot Ignition Wire Tester IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition

Brand Name:YUYANG

Model Number:YYF002

Place of Origin:China

...Ignition Temperature Testing Equipment For Plastic Sample Intruduction Plastic ignition temperature tester according to GB4610-2008 plastic hot air furnace method of determining the ignition temperature plastic ignition temperature tester design and manufacture, in full compliance with GB4610-2008, while meeting the requirements of ISO871-2006 standards, used to assist in testing...