tablet dissolution test apparatus

Brand Name:PEGO GROUP

Model Number:VW-1

Place of Origin:China

... and UL2556, it is applied to test the resistance of a wire, cable or cord to the horizontal and vertical propagation of the flame (VTM, VW-1, FT-1 and FT-2 classifaction). The flammability test uses a bunsen burner of a specified size (inside diameter of

Brand Name:PEGO GROUP

Model Number:PG-GYQH

Place of Origin:China

... of electronics products and household appliance according to IEC60587. The test uses liquid contaminants and inclined specimen to evaluate the resistance to tracking and corrosion of electrical insulating materials under severe ambient conditions at

Brand Name:PEGO Group

Model Number:PG-PD10A

Place of Origin:China

Test Eha: IK01 to IK10 Pendulum Hammer Impact Test Apparatus Swing Pipe Combines with Striking Elements 1. Introduction The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Eha and IEC62262 (equivalent EN62262), and can meet the test...

Brand Name:Pego Electronics

Model Number:PG-PD50

Place of Origin:China

...Test Apparatus IEC62262 1. Introduction The pendulum hammer mechanical impact test apparatus can meet the test requirements of IEC60068-2-75 test Eha and IEC62262. The equipment consists of striking elements, swing pipes and test rig. The striking elements for IK07 (2J) to IK11 (50J) is made of steel, the striking element for IK01 to IK06 tests...

Brand Name:LIB INDUSTRY

Model Number:R-UL020

Place of Origin:China

...Test UL Rain Test Apparatus Description 45 ° Watering Test UL Rain Test Apparatus is suitable for UL rain and 45 ° water spraying test of products. The bracket base adopts universal band brake caster, which is convenient to move and fix. It adopts UL laboratory nozzle, which meets UL standard. Technical Specification 45 ° Watering Test UL Rain Test Apparatus...

Place of Origin:China

Brand Name:CHENGFENG

...Test Machine High-voltage Track Testing Equipment IEC60587 Standard : Tracking resistance tester Erosion resistance tester Electrical tracking test machine Insulation tracking tester High-voltage tracking test equipment Dielectric tracking tester Contamination tracking test apparatus Electrical erosion test machine Tracking and erosion test apparatus IEC 60587 test...

Brand Name:Sinuo

Model Number:SNQC1010

Place of Origin:China

UL 2594 Clause 58 Electric Vehicle Drive-Over Testing Apparatus Complied Standards & Clauses This drive-over testing apparatus is conforms to UL 2594:2016 clause 58. Equipment Overview The test equipment is used to check whether a plug or vehicle connector...

Brand Name:Sinuo

Model Number:SN4420

Place of Origin:China

... performance of the enclosure for self-ballasted lamps and lamp adapters under UL water spray environment. The water ingress testing equipment apply spray test to test sample by controlling the water supply pressure and the distance between the nozzle and

Brand Name:Sinuo

Model Number:SN1128

Place of Origin:China

...Pressure Test Apparatus For Pressure Resistance Test Product Information For Hydraulic Pressure Test Apparatus: This testing machine conforms to IEC60335-2-24:2017 clause 22.7 and clause 22.103, etc. It is used for pressure resistance and leakage test of ...

Brand Name:PEGO

Model Number:ZRS-2

Place of Origin:China

...Test Equipment 1000℃ Glow Wire Test Apparatus 1. Introduction The glow wire test apparatus is designed according to IEC60695-2-10, UL746 and GB/T5169.10. The specific material and sharp heating wire is heated to specific temperature (550 ℃~960 ℃) for 1 min by max current, then vertical burns the EUT with certain pressure (1.0N) for 30s, then check if the test...

Brand Name:Pego Group

Model Number:PG-BPA

Place of Origin:China

... etc. the surface of the part to be tested is placed in the horizontal position and a steel ball of 5 mm diameter is pressed against the surface with a force of 20 N. The test is performed in a heating cabinet at a temperature of 75°C ± 2°C. The ball is

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

... Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire...

Brand Name:PEGO Group

Model Number:GW-1H

Place of Origin:China

...-2-13, GB/T 5169.13, IEC62368-1 Section 6.3.1, IEC60598-1 Section 13.3.2, IEC60335-1 Section 30.1. It is widely used in material testing on lamps, household appliances, IT/AV equipment,

Brand Name:PEGO Group

Model Number:NF-1H

Place of Origin:China

...Testing Needle Flame Test Apparatus 1. Introduction The needle flame test apparatus is designed according to the requirements of IEC 60695-11-5, GB/T5169.5, Section 13.3.1 of IEC60598-1, Appendix G.2.1 and Section S.1 of IEC62368-1, and Section 30.2.4 of IEC60335-1. It is widely used in material testing...

Brand Name:PEGO Group

Model Number:TI-1H

Place of Origin:China

...-1 clause 8.9.1.7, IEC60335-1 clause 29, IEC61010-1 clause 6.7.1.3, IEC60884-1 clause 28.2, and BS1363-1 clause 8.2 Appendix C. It is widely used in material testing on lamps, household appliances, IT/AV appliances, and

Brand Name:Pego Electronics

Model Number:PG-CHTA

Place of Origin:China

Current-Carrying Hoses Torsion Test Apparatus IEC60335-2-2 1. Introduction The current-carrying hoses torsion test apparatus is designed to meet the test requirements of IEC60335-2-2 clause 21.104, for verifying torsion Resistance of Current-Carrying hoses...

Brand Name:Pego Electronics

Model Number:PG-SDA

Place of Origin:China

...Test Apparatus for Testing the Automative Cable Compliant with ISO6722-1 and ISO 19642-2 1. Introduction The sandpaper abrasion test apparatus is designed according to ISO6722-1 clause 5.12.4.1 figure 6, ISO 19642-2 clause 5.3.2.4 and figure 3, GB/T25085, QC/T730, JASO D608, JASO D611, SAE J1127, SAE J1128 and JIS C3406. The sandpaper abrasion test...

Brand Name:Pego Electronics

Model Number:PG-CBT

Place of Origin:China

Cable Snatch Test Apparatus for Checking Mechanical Strength of Complete Cables Compliant with IEC60227 Introduction The cable snatch test apparatus is designed to meet the test requirements of IEC60227-2:2003 clause 3.3 and IEC60227-1:1998 clause 5.6.3.3...

Brand Name:Pego Electronics

Model Number:PG-CBT

Place of Origin:China

... clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4 and GB2099-94, for bending test at low temperature for insulation of cable. The cold bend test is applied to the cores of circular cross-section having an external diameter up to and including 12.5mm,

Brand Name:Pego Electronics

Model Number:PG-CHA

Place of Origin:China

...Test Apparatus for Testing the Mechanical Strength of Current-Carrying Hose as Per IEC60335-2-2 1. Introduction his test apparatus is designed according to IEC60335-2-2 clause 21.102 figure 101 and IEC60335-2-24 clause 21.102 and figure 101, it is applied to test...