power socket tester

Place of Origin:China

Brand Name:KeRang

...,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with

Brand Name:PEGO Group

Model Number:PG-NSP

Place of Origin:China

...mechanical strength of non-solid pins of plugs and portable socket-outlets. A force of 100N is exerted on the pin which is supported as shown in IEC60884-1 figure 14, for 1min in a direction perpendicular to the axis of the pin, by ...

Place of Origin:China

Brand Name:HongCe

Model Number:MF-1

... and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the minimum force of pulling the single plug pin from the plug bush is in the range of the standard required. The clamping system is easy to operate. The top

Brand Name:HongCe

Place of Origin:China

AS/NZS3112 Plug And Socket Gauge Product information: The gauges conforms to the standard of AS/NZS3112.It is measuring Australian and New Zealand 's standard plug and socket. No. Standard picture NO. Gauge name 1 AS/NZS3112 figure 3.1 Gauge for depth of ...

Brand Name:HongCe

Place of Origin:China

UL498 Plug And Socket Gauge For Measuring American Standard Plug And Socket Product information: The gauges conforms to the standard of UL498.It is measuring American standard plug and socket. NO. Product name UL498 standard Figure UL498:2012 standard ...

Brand Name:HongCe

Model Number:HC9914C

Place of Origin:China

Apparatus For Breaking Capacity And Normal Operation Test For Plugs And Socket-Outlets Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 20,clause 21 and figure 16. Breaking capacity: ...

Brand Name:PEGO GROUP

Model Number:PG-SEV1011

Place of Origin:China

SEV1011 Gauge B to Verify Contact Making for Socket - Outlets and Plug 1. Usage: Gauge A is used to verify the distance between the front surface of the socket-outlet portion and the contacts Gauge B and Gauge C are used to verify the contact making of ...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Place of Origin:china

DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-...

Brand Name:kingpo

Model Number:KP-BCL04

Place of Origin:china

Harden Steel IEC60884 Figure18 And Figure19 Verification Of Maximum Withdrawal Force Test Apparatus Application: This device complies with the requirements of IEC60884 Figure 18/19, VDE0620, etc. It is suitable for checking the maximum force required to ...

Place of Origin:China

Brand Name:KeRang

...ch occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The

Brand Name:HongCe

Model Number:HO6508

Place of Origin:China

Performance Tester For Proximity Switches With Integrally Connected Cables Pull Force 160N Torque Test 0.1Nm (360°) Product Introduction The performance tester for proximity switches with integrally connected cables is special designed and manufactured as ...

Place of Origin:China

Brand Name:HongCe

Measuring Gauge For Plug and Socket Product information: Some measuring gauges are designed and manufactured by Hongtong Electromechanical Co., Ltd. These measuring gauge confirm to the standard of GB2099.1-2008 clause9,GB1002-2008 and GB1003-2008 whi...

Brand Name:HongCe

Model Number:HC-EV1

Place of Origin:China

7 Inch Touch Screen Electric Vehicle Plug And Socket Life Test Machine Product information: This test machine is manufactured according to the standard requirement of IEC 62196-1, it is suitable for various types of electric vehicle plug and socket life ...

Brand Name:HongCe

Model Number:HC9917

Place of Origin:China

Apparatus For Testing Cord Retention For Flexible Cables Of IEC60884-1 Figure 20 Single Station Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 23.2, figure 20 Application: It is ...

Brand Name:Pego Tester

Model Number:PG-PIT

Place of Origin:China

IEC60065 Plug - In Torque Test Apparatus Equip with BS / UL / AS / NZS Plugs 1. Introduction The plug-in torque test apparatus is designed according to IEC60065 figure 11 and IEC60950-1 clause 4.3.6, it is applied to check various elements that are ...

Brand Name:PEGO

Model Number:PG-WDF

Place of Origin:China

Plug Socket Withdrawal Force Testing Equipment According to IEC60884-1 and VDE620 1. Introduction Maximum and minimum withdrawal force testing equipment is designed according to IEC60884 figure 18/19 and VDE0620, it is applied to evaluate the maximum and ...

Brand Name:PEGO

Model Number:PG-TIS166

Place of Origin:China

TIS166-2549 plug and socket-outlet test gauges 1. Introduction The gauges are strictly designed according to TIS166-2549, in figure A.1 to A.5 are used to check dimensions of the socket-outlet and gauges in figure A.6 to A.7 are used to check pulling force...

Brand Name:PEGO GROUP

Model Number:GB/T 1002-2021

Place of Origin:China

GB/T1002-2021 Single-Phase Plug and Socket-Outlet Test Gauges 1. Introduction The single phase plug and socket-outlet test Gauges are designed according to GB1002-2021 figures 8/9/10/11/12/13/14/15/16. They are applicable to verify the single phase plugs...