iec 60811 cable testing equipment

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test

Brand Name:HongCe

Model Number:HDX1314

Place of Origin:China

... to testing the damage degree of flexible cord when applying a certain gravity pull. Test object of rated voltages up to and including 450/750V polyvinyl chloride insulated cables. The test device is easy to operate, can preset the number of test times (up

Brand Name:HeJin

Model Number:VF-1

Place of Origin:China

...Testing Equipment For Vertical Flame Propagation For Single Insulated Cable Standard: IEC 60332-1-1 Tests on electric and optical fibre cables under fire conditions –Part 1-1: Test for vertical flame propagation for a single insulated wire or cable – Apparatus; IEC 60332-1-2 Tests on electric and optical fibre cables under fire conditions –Part 1-2: Test for vertical flame propagation for a single insulated wire or cable...

Brand Name:DAXIAN

Model Number:DX8332

Place of Origin:China

... cables and the determination of gas acidity by measuring ph and conductivity. Remark: - IEC 60754-1, 2 Electric Cables Halogen Acid Gas Release Tester, Cable Corrosion Tester measures gas volume of Halogen Acid (IEC 60754-1), pH concentration(PH Meter,

Brand Name:HongCe

Model Number:HDX1316

Place of Origin:China

IEC 60227-2 Cord Bending Tester for Polyvinyl Chloride Insulated Cables The cord bending tester is designed and manufactured according to IEC 60227-1 clause 5.6.3.2, IEC 60227-2 clause 3.2. It is used to checking the power cord flexing(bending) resistance performance. Test object of rated voltages up to and including 450/750V polyvinyl chloride insulated cables. The test device is easy to operate, can preset the number of test...

Brand Name:Sinuo

Model Number:SN1112

Place of Origin:China

IEC 60335-1 Programmable Electrical Appliance Flexible Cable Flexing Testing Equipment Standards & Clauses: This flexible cable flexing testing equipment meets the requirements of IEC 60335-1 clause 25.14, IEC60335-2-14, IEC60884-1 clause 23.4, IEC 60745...

Brand Name:HongCe

Model Number:FL-1

Place of Origin:China

...Cable Flexing Swivel Testing Machine With Load 6 Workstations IEC60884-1 Product Introduction: HongTong FL-1 Plug Cord Flexibility Tester is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21, which can process 10,000 flexing at a rate of 60 flexing per minute. The test equipment has 6 workstations, thus six cables or cords fitted with plugs can be tested simultaneously. Test Application: The cables

Brand Name:Ningbo Suntech Power

Model Number:CHCTS series

Place of Origin:Ningbo，China

Cable Heat Cycle Test Systems , Auto Cycling Heating Systems I. Product Description: CHCTS series Cable Heat Cycle Test System is the equipment for cable auto cycling heating system, suitable for XLPE cable test. It’s composed of digital control measure cabinet and multiple straight-through type large current generators. It complies with requirements of IEC standards and automatically monitors and records test data during heating test...

Brand Name:HongCe

Model Number:FCF-1

Place of Origin:China

...IEC60245.2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more

Brand Name:Fanke High-voltage

Model Number:CHCTS series

Place of Origin:Wuhan ,China

Cable Heat Cycle Test Systems , Auto Cycling Heating Systems I. Product Description: CHCTS series Cable Heat Cycle Test System is the equipment for cable auto cycling heating system, suitable for XLPE cable test. It’s composed of digital control measure cabinet and multiple straight-through type large current generators. It complies with requirements of IEC standards and automatically monitors and records test data during heating test...

Brand Name:Fanke High-voltage

Model Number:CHCTS series

Place of Origin:Wuhan ,China

Cable Heat Cycle Test Systems , Auto Cycling Heating Systems I. Product Description: CHCTS series Cable Heat Cycle Test System is the equipment for cable auto cycling heating system, suitable for XLPE cable test. It’s composed of digital control measure cabinet and multiple straight-through type large current generators. It complies with requirements of IEC standards and automatically monitors and records test data during heating test...

Brand Name:HongCe

Model Number:HVW-1

Place of Origin:China

... Cords. Application of Cable Flame Testing Equipment: The UL 1581 is an internationally recognised standard test for evaluating fire safety for electric cables. The UL 1581 test for flammability of cable materials gives a preliminary indication of their

Brand Name:KINGPO

Place of Origin:Mainland China

IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test...

Brand Name:HTI

Model Number:HTB-046

Place of Origin:Guangdong,China(Mainland)

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and including 0

Brand Name:HTI

Model Number:HTB-046

Place of Origin:Guangdong,China(Mainland)

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and including 0

Brand Name:HongCe

Model Number:HDX1314

Place of Origin:China

...Cable Testing Equipment Capable of 1~9999 Test Times Standard of Cable Testing Equipment: Comply with standards: UL817 No. 99.1-99.2 "Turning test", No. 100.1-100.3 "Sheath retention test" Description of Cable Testing Equipment: Purpose: Used for plug power cord sudden tensile strength test, torsion test, load test and ground wire current test Sample range: plug power cord Structure and function: The test...

Brand Name:HongCe

Model Number:HDX1302

Place of Origin:China

...Cables Flexing Tester for Cable Testing Equipment: 1000±20mm Testing Distance Ensures Precise Results Product Introduction with Cable Testing Equipment: Comply with standards:IEC60245-1, IEC60245-2. Purpose:used for mechanical strength testing of finished flexible cables. This test is not applicable to cables with more than two concentric layers whose conductor nominal cross-section exceeds 18 cores. Sample scope: finished flexible cable

Brand Name:YUYANG

Model Number:SCV

Place of Origin:CHINA

... is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Standards: IEC 60332-1-1~3:2004 Features Stainless steel box, the

Brand Name:HongCe

Model Number:HDX1314

Place of Origin:China

...100.3 "Sheath retention test" Description of Cable Testing Equipment: The power cord sudden tensile testing machine is a device used to test the tensile strength of power cords under extreme conditions. It simulates sudden pulls or cuts on the power cord,

Brand Name:Sinuo

Model Number:SN9926

Place of Origin:China

...used for checking the axial strength of the Edison cap. Technical parameters: Samples and restrictions Edison lamp cap Test purpose Used to detect the mechanical strength of caps of Edsion lamps. Test principle Use a motor-driven pressure plate to apply a