gas ceramics ignition electrode

Brand Name:THD

Model Number:HD-103

Place of Origin:Chongqing, China

...available Bracket : Steel-ZINC Plated Features of Gas ceramic Ignition Pin Electrode For Infrared Gas Burner: 1) Materials:95% aluminum ,ceramic 2) Voltage resistance:16-25KV 3) Available for gas utensils and portable gas stoves 4) with induction probe 5)

Brand Name:Vanka

Model Number:GB-09

Place of Origin:China

Gas Boiler Ignition Electrode with Grounding Wire Assembly Description: This ceramic electrode ignition spark plug wire and grounding wire are specifically designed for wall-mounted boilers. They ensure reliable ignition performance by facilitating the ...

Brand Name:KRHX

Model Number:KR-H3

Place of Origin:China

Ceramic Spark Plug for Pellet Stove Introducing the Kairui ceramic biomass igniter range, an advance in ignition technology for solid wood fuels. Brief description A 230V 300W cartridge pellet stove resistance igniter, also known as an ignitor, is an electrical component used to ignite the pellets in a pellet stove. When electricity is supplied to the igniter, the heating element becomes hot, which ignites...

Categories:ELECTRODE

Country/Region:china

... bracket, and a terminal. Product Name Spark electrode pin Applicable gas species Natgas, LPG, artificial coal gas etc Temperature resistance Ceramic≥1200ºC Ignition line≤250ºC Electrode needle OCR25AL5, SUS310, SUS304 Cable UL1332, UL3573, UL3304,

Brand Name:Mingrui

Model Number:XF-170

Place of Origin:China

...Ignition Electrode Alumina Ceramic Tube Alumina Ceramic Spark Electrode for Ignition Device The ceramic spark ignition rods are widely used in ignition devise of combustion machine, boiler, with strong points such as sensitive ignition, durable, strong ageing resistance, high temperature resistance, corrosion resistance, high dielectric strength. Standard interface thread is M14× 1.25, M16 × 1.5, M18 × 1.5, G1/2. Ignition electrode...

Brand Name:Julun

Model Number:ZM86 2R600L

Place of Origin:China

Ceramic 2 - Electrode Arrester Gd Tube Protection ZM86 2R600L Series Electrical Specifications ZM86 2R600L​- Switching Spark Gap ZM86 2R600L- Nominal breakdown voltage 560 V Voltage deviation ±10% V Initial values 　 　 First ignition value ≤610 V Following ignition values 500-580 V Electrical life 　 　 After 200000 ignitions, first ignition value after 24 hours in darkness ≤650　 V Following ignition...

Brand Name:ZG

Model Number:MS

Place of Origin:China

Ignition Electrode Ceramic Components 1. Use a silicon nitride hot surface igniter for ignition to ignite the burner, completely eliminating the difficulty of cold start ignition, which is safer and more reliable than traditional pulse-style ignition; it replaces the traditional silicon carbide igniter...

Brand Name:KT

Model Number:KT-STEATITE 02

Place of Origin:CHINA

Insulating electrical steatite ceramic plug 1.Description Our industrial ceramic parts include, tube, rod, plate, disc, wafer, ring, seal, bearing, valves, pump plunger, beam, roller, shaft, screw, washer, sleeve, hunger, spacer, holder, carrier, insulator...

Brand Name:XISHENG

Model Number:XS-CFBG-06

Place of Origin:China

... Packaging size 80.0 cm * 80.0 cm * 30.0 cm Consumption 0.45~0.75L/H Power 15KW Ignition times 5000 Ignition method Piezo electric pulse Function Extinguish protect Usage scene Outdoor garden, hall, apartment, swimming pool, ...

Brand Name:NEMOTO

Model Number:NAP-505R

Place of Origin:Japan

...Gas Sensor 3 Electrode Design The NAP-505 Gas Sensor is a low–cost 3-electrode electrochemical gas sensor designed for the detection and measurement of carbon monoxide in the range 0-1000ppm, in domestic carbon monoxide detectors, fire detectors, air quality monitors and commercial gas detection applications such as Underground Car Parks. *3-Electrode...

Brand Name:TR Solids Control

Model Number:TRYPD-20/3T

Place of Origin:Xi'an,China

... of flammable and poisonous gas overflow while drilling and eliminate the harm to the environment and ensure safety.It consists of a gas guiding pipe,an ignition device,a torch and an explosion-proof hose,integrating high pressure electronic ignition and

Brand Name:TRIGONPOWER

Model Number:01_1_4A_IGR01-4

Place of Origin:P.R.CHINA

High Voltage Pulse Oven Ignition Unit 01_1_4A_IGR01-4 Description: The electronic components (resistor and diode), coils, epoxy potting, and the ceramic head are all with good high temperature resistance and good high voltage resistance, so we could make ...

Brand Name:BJCCWY

Model Number:Piezo ceramics

Place of Origin:China

...Ceramics Silver Electrode in the same side Established in 1999, Beijing Cheng-cheng Weiye Science and Technology Co., Ltd is a professional manufacturer specializing in ultrasonic transducers, ultrasonic apparatus and piezoelectric ceramics. Piezoelectric ceramic...

Brand Name:MEICELY

Model Number:2619347

Place of Origin:China

... Name MEICELY Car Model Scania Other OE Number: Other OE No. As Follows OE Number Other OE No. Gas Engine Ignition Coil 2992039 Gas Engine Ignition Coil 2992037 Gas Engine Ignition Coil 2619347 Gas Engine Ignition Coil 2307732 Products Description: The

Brand Name:Jinghui ceramics

Model Number:JH.ACT.001

Place of Origin:Hunan, China

... diameter can be 1mm, Max. the outer diameter can be 20mm 5. Surface treatment: External surface to be polished or glazed Main features of alumina ceramic tube 1. Outstanding wear resistance, over

Brand Name:AIPU Solids

Model Number:APFI20/3

Place of Origin:China

...gas separator for drilling mud system used in oilfield APFI flare ignition device is also referred to as a flare ignitor or a gas flame. Ignitor for liquid-gas separators is an environmentally-friendly discharge torch that is exclusively produced by our company. It is suitable for ignition of long distances and air and toxic gas...

Brand Name:wuxi special ceramic

Place of Origin:Made in China

Product Discription Silicon nitride igniters are normally rectangular in shape. These igniters have a lot operation zone up to 1000 degree C . and a cold zone in the contact area. Encapsulated terminal can prevent short circuit caused by conductive ...

Brand Name:Tankii

Model Number:A1

Place of Origin:China

Dia 2mm 3mm 1.7mm fe-cr-al A1 wire FLAME ROD heating alloy wire for central igniter electrode Resistance heating wire includes pure nickel, chromel alloy, Fe-Cr-Al alloy and copper nickel alloy. Resistance heating wire is produced by smelting, steel ...

Brand Name:YUYANG

Model Number:YY715

Place of Origin:China

... to characterize the product by measuring ease of ignition (time), rate of smoke generation (mass loss) and toxicity (gas analysis). These are essential parameters in the evaluation of the potential fire hazard of products. Future possibility of being up