PETG Fliament 1.75 / 3.0 mm
1, Specifications: 1.75&3.0
2, Manner and packing: use vacuum package, the net weight 1.0KG.
3, High transparent, good transmission of light, good gloss.
4, Good toughness.
5, Resistance to acid and alkali.
6, Working temperature 200°C -250°C.
|Dongguan Hengli Dejian Plastic Electrical Products Factory|
|Various types of material parameters control table|
|have in stock color||Advantage|
|PLA(contain Fluorescence/glow in dark)||1.75/3.0||200-240||60-80 Or not heating||44colors||Biological degradation / printing without odor / not curling, not
|ABS(contain Fluorescence/glow in dark)||1.75/3.0||230-270||100-120||38colors||Good plating performance / toughness|
|HIPS(contain Fluorescence/glow in dark)||1.75/3.0||230-270||100-120||19colors||Soluble in lemon|
|Change color(31℃change color)ABS||1.75/3.0||230-270||100-120||4colors||Color changes at different temperatures|
|Change color(31℃change color)PLA||1.75/3.0||200-240||60-80 Or not heating||4colors||Color changes at different temperatures|
|Light change color ( under the sun)ABS||1.75/3.0||230-270||100-120||2colors||change color under the sun|
|Light change color ( under the sun)PLA||1.75/3.0||200-240||60-80 Or not heating||2colors||change color under the sun|
|Nylon||1.75/3.0||250-280||100-120||Transparent/White/Black||Good rigidity and elasticity|
|PC||1.75/3.0||250-280||100-120||6colors||Hardened with toughness, temperature resistance of 125℃|
|POM||1.75/3.0||200-240||100-120||White/Black||Wear resistance and torsion resistance, good insulation performance|
|PETG||1.75/3.0||200-240||100-120||10colors||Acid and alkali resistant / good toughness|
|ConductiveABS||1.75/3.0||230-260||100-120||Only Black||Effective release and prevent the generation of static electricity|
|Wood( base material is ABS )||1.75/3.0||180-195||80-100||Light||Like real wood/ Can be nailed, can be drilled, can be carved|
|Wood(base material is PLA)||1.75/3.0||180-195||80-100||Dark Brown||Like real wood/ Can be nailed, can be drilled, can be carved|
|PVA||1.75/3.0||190-220||not heating||Skin color||Water soluble material|
|Flexible||1.75/3.0||200-220||60-80||9colors||High soft, high elastic / food grade|
|Flame Retardant||1.75/3.0||230-270||100-120||White/Black||Fire prevention function|
|Metal||1.75/3.0||190-210||60 Or not heating||copper / bronze / Brass / Red copper / aluminum||Good gloss, corrosion resistance|
|Polymer Composites(Like silk)||1.75/3.0||200-220||not heating||5colors||High gloss, easy to peel, print smooth|
|110℃PETG||1.75/3.0||200-240||100-120||Transparent/White/Black||Acid and alkali resistant / good toughness / high temperature
|Carbon fiber||1.75/3.0||200-220||not heating||Only Black||Matte black, strength, shrinkage rate is small|
|ASA||1.75/3.0||230-260||100-120||White/Black||Anti ultraviolet (anti-aging)|
|Soft PLA||1.75/3.0||200-220||not heating||White||Good elasticity, good flexibility.|
1, Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it,
use vacuum package, every Tray into a small box, and the each 8
small box into a master carton.
2, Plastic tray: diameter 160mm, axle hole32mm, overall height 90mm.the
Diameter 200mm, axle hole 56mm, overall height 70mm. the
corresponding carton 43.5×43.5×18cm.
We have PLA , ABS, HIPS, PC, PA(nylon), POM, PETG, PVA,WOOD,FEXIBLE
Advantages: Acid and alkali resistance,can use very widely.
Disadvantages: The melt point much higher.
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use
recycled material or regrind material, and all had achieved the
latest REACH certificate.
2, Before the mass production, our engineer always do the test to
make sure that sure that each batch of new raw materials must be
printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of
the filament and keeps it in a right range of 1.75 / 3.0mm, and our
engineer will adjust it immediately when it alarms to indicate of
wrong size, and this unqualified filament will be cut off and never
4, We to keep the filaments dry, each roll of filament is packed in a
vacuumed poly bag with a desiccant inside of it.