LPG-100 Series High Speed Centrifugal Spray Dryer,
Spray Drying Machine for sale
After the air been filtered and heated the air enters into the air
distributor on the top of the dryer. The hot air enters into the
drying room in the spiral form and uniformly.
Passing through the high-speed centrifugal sprayer on the top of
the tower, the material liquid will rotate and be sprayed into the
extremely fine mist liquid beads.
Through the very short time of contacting the heat air, the
materials can be dried into the final products. The final products
will be discharged continuously from the bottom of the drying tower
and from the cyclones. The waste gas will be discharged from
Technical Parameters of LPG-100:
|Item Name||LPG-100 Series High Speed Centrifugal Spray Dryer, Spray Drying
|Inlet Temperature||140-350 ℃, automatically controlled|
|Outlet Temperature||80-90 ℃|
|Rotation Speed||18,000 rpm|
|Heat Supply||electric-steam, fuel oil or gas|
|Max Electric HeatingPower||81 kw|
|Overall Dimensions||4600*4200*6000 mm|
- The drying speed is high when the material liquid is atomized, the
surface area of the material will increase greatly. In the hot-air
flow, 95%-98% of water can be evaporated at a moment. The time of
completing the drying is only several seconds. The is especially
suitable for drying the heat sensitive materials.
- Its final products own the good uniformity, flow ability &
solubility. And the final products are high in purity and good in
- The production procedures are simple and the operation and control
are easy. The liquid with moisture contents of 40-60% (for special
materials, the contents might be up to 90%). Can be dried into the
powder or particle products once a time. After the drying process,
there is no need for smashing and sorting, so as to reduce the
operation procedures in the production and to enhance the product
purity. The product particle diameters, looseness and water
contents can be adjusted through changing the operation condition
within a certain range. It is very convenient to carry out control
As a good and rich experience supplier, we should offer customer
the best quality and best price of the machine.
1. Introduce the suitable product to the customer in detail, answer
the question raised by customer carefully.
2.Make the suitabe project as the customer requirement and make
sure the machine is suitable for the material.
About the packing and delivery:
1. Ensure product with high quality and pre-commissioning before
2. Delivery on time.
3. Provide full set of documents as customer’s requirements.
Provide considerate services to minimize clients’ worries:
1. Assist clients to prepare for the first construction scheme.
2. Install and debug the equipment.
3. Train the first-line operators.
4. Examine the equipment.
5. Take initiative to eliminate the troubles rapidly.
6. Provide technical support.
7. Establish long-term and friendly relationship.
- Provide clients one-year warranty to make sure the machine work
- We always keep certain inventory level of spare parts, which means
the replacements can be sent to you timely.
- Send every client a preferential quota.